Home > News

The graphite electrode shall be used in strict accordance with the instructions

Pulished on Jun. 04, 2019

The graphite electrode shall be used in strict accordance with the instructions

Graphite electrode is no stranger to us. The main component is graphite, which has become the best conductive material today. The graphite electrode bought from graphite electrode manufacturer China also needs to follow the instructions strictly in the use process.

First, the guard cap above the hole needs to be wiped to test the integrity of the electrode thread.

On the premise of determining the integrity, the next step is to clean the hole internal thread and spare graphite electrode surface.

Insert the connector into the electrode hole and the electrode spreader into the other end.

Remove the electrodes, and be careful not to let the electrodes collide with other fixtures.

Lift the spare electrode to the top of the electrode to be connected. When the end surfaces of the two electrodes are 10-20mm apart, clean the exposed part of the two end surfaces of the electrode and the connector with compressed air again, making it lighter to avoid the damage of the thread of the electrode hole and the connector.

Just tighten the spare electrode.

It is important to note that if the graphite electrode is found to be wet, it should be dried.

Visitors to this page also visit the home page of the graphite electrode network.

graphite electrode